If you have a fire or water emergency, please call us now at (713) 461-2700

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

The Process of Mold Removal and Remediation

5/22/2017 (Permalink)

The Process of Mold Removal and Remediation

Molds and mildew cause significant damage to homes and commercial establishments. Mold in home verandas indicates the presence of excess moisture and calls for reliable mitigation procedures. As such, molds are common in basements, sunken areas, or in places where a plumbing system leaks. Since the deodorization of the smelly odor is a temporary solution, you should plan to get rid of the fungus as well a the mildew. Poor ventilation can also contribute to the increase of moisture in the indoor air. Spores can spread the mold in a residential or commercial property in a short time. Excess moisture causes wooden materials to warp and rot.

If you have mold home patios, you must plan for mold removal and deodorization. The mold damage mitigation involves the killing of fungus and mildew. With so many mold varieties, you need a seasoned professional who understands the mitigation procedures. Fungus and mildew are some of the common varieties of mold in home and business enterprises. You can also start with deodorization to remove the smelly odor. Experts discourage the DIY mold removal tactics that are likely to fail. Improve your chances of success by leaving this sensitive project to the professionals. In addition, hiring the professionals mean that you will not be endangering your health by inhaling the toxic mold.

Professional mold remediation initiatives involve fixing the sources of the excess moisture first. Even if you address the issue, the molds are likely to recur if the problem persists. Identify the moisture problems and hire a professional plumber to address them. If the source of water is a leaky roof, you should fix the roof before you call a mold remediation specialist.

If you’re experiencing mold damage in your attic, then you might have to grapple with roof leaks and poor ventilation. The mold damage in your home could also result from plumbing problems and seepage on the foundation. When you identify the source of your moisture issue, you must fix it as soon as possible. The mold damage will continue until you address the moisture issue. Mold removal can prevent the aesthetic and structural damage to your home. Unfortunately, some homeowners ignore the problem by opting for deodorization and other shortcuts that eliminate the smelly odors. Mold in home foundations indicates the poor drainage is causing some seepage.

Identify the source of mold in home terraces before removing it. Once the mold remediation consultant has pinpointed and fixed the main source of your commercial mold damage, the process of mold removal can begin. Whether you are dealing with green, black, or another mold variety, you should take the following steps:

Seal off the area

The commercial mold damage and remediation process begin with sealing off the entire area with plastic sheeting and tape. This intervention keeps the dangerous mold spores within the work area and prevents the distribution of the mold throughout the home.

Wet vacuum

The wet vacuum will clean up the stagnant water and eliminate the mold itself. You can now use the dry vacuum to launch mold spores into the air. In the case of commercial mold damage, you might have to acquire the special equipment to eliminate the mold.

Kill the mold

Use an approved fungicide and apply it with a sprayer or fogger. Avoid bleaching the mold since it will not kill the mold. Killing the mold will prevent further commercial mold damage.

Clean the area

Use whatever means necessary to clean the area. Cleaning involves scrubbing, scraping, and removing the debris. You will also need to remove the materials such as furniture that have been affected by the mold. Seal and label the debris before you dispose of them.

Dry out the Area

Finally, dry out the area by using fans and dehumidifiers. Failure to dry the area will cause the mold to resurface. The health of your home and family depend on how well you undertake these procedures. Visit http://www.SERVPROtowncountry.com for more information on mold damage.

Other News

View Recent Posts